Hello Guest, Log in!
0 item(s)

Handpiece, Power Chisel

Your Price: $60.00
Part Number:10139
Foredom Power Chisel Handpiece, Style H.50.  Foredom's chisel handpiece gives a power assist to carving projects in all types of wood, plastic and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends.  The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors.  Handpiece attaches to any flex shaft machine with a standard key tip shaft.  The Chisel Handpiece must be used only in the forward motor direction.  This item has a 90 day warrenty. 

Recommended Speeds: Optimum Speed Range is 3000-10000 rpm; Max. Operating Speed: 18000 rpm.
Handpiece specifications: 6" long 1" in diameter.
Does not come with any chisels.

Maintenance: After every 200 hours of use you should clean and lubricate this handpiece.  The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant.  If you do not have Foredom Grease (Part No. MS10008) it is available in our web store under Supplies and Parts - Lubrication- All Lubricants.  Follow the instructions that came with your handpiece or click on the link for step-by-step maintenance instructions.
Operating Tip: Using the chisel handpiece with a dial speed control is easier than with a foot operated control.  Table top dial controls are available separately and named below.  Consider ordering a kit containing the chisel handpiece and dial speed control (kit depends on motor -M.TX & M.LX or M.SR- that you have).  Certain Foredom bench mounted flex shafts also come with dial controls built into their bases (models M.LXM, M.TXM and M.SRM).
Dial Speed Controls:
* C.EM (for Series S SR CC and L motors)
* C.EMH (for Series H motors)
* C.EMX (for Series TX and LX motors)